Right to Your Door
Doors dominate the interior. They help build the overall impression and create a smooth transition between the different parts of your home so that they come together in one eye-catching and cozy whole. Every little detail needs to be taken into consideration. Our clients can enjoy a full range of services from measurement to production assembly and delivery.
Our offer
Have You Been Looking for Quality and Elegant Design?
We work with a laminate surface treatment, which is highly resistant to abrasion or scratching. The laminate is easy to take care of and clean as it does not absorb any liquids. We also use a colour-identical CPL laminate on door casings and glazing beds to make the overall result look aesthetically pleasing and natural.
EGGER and KAINDL Laminates
are a perfect imitation of natural wood such as veneer or solid wood. Unlike veneer and solid wood, the laminate is colourfast. The EGGER and KAINDL Concern is the producers of large-area materials, work plates and floors, so the colours of the doors and interior can be identical.
Do You Want Practical Solutions and Thought-through Details?
Edges
Many years of experience have taught us that every little thing matters. That is why we use a durable, color-matched ABS edge HRANIPEX instead of a paper rebate edge. The door rebate is the most stressed part of the door.
Connections and Joints
The most stressed part of the door frame is its central part. Therefore, we milled the sharp edge to a radius of 6 mm and then covered it with CPL laminate. This created a more beautiful and safer uniform part of the door frame without a visible sharp board-glue-edge joint. The encased corner of the central part of the door frame is thus safer and at the same time brings a number of practical advantages.
Frame connection type:
- 45 degree angle (classic joint)
- 90 degree angle (so-called butt joint)
Lock
The door is fitted with a quality lock from the Italian company AGB with an elegant chrome-plated key. The rebate frames are fitted with maintenance-free hinges with a Teflon shank to prevent the door from rattling or lubricant from leaking out of the hinges. These are fitted in solid metal German Simonswerk pockets, which are stronger than plastic pockets and have a higher load capacity – bear in mind that in most cases the damaged pocket can no longer be removed from the fitted door frame and replaced.
Interior Door
Custom-made
Do you have specific requirements?
If you need a door in dimensions that are not available on the market, or your opening does not comply with STN, do not hesitate to contact us. We can supply doors in widths from 52 to 112 cm and heights from 182 to 210 cm, including door frames.
We are open to your ideas
We are ready to meet non-standard requirements atypical spaces come with. We deliver interior doors and doorframes standardly within 2 months. Contact us and we will do everything for your comfort and satisfaction.
Advantages of Custom-made Doors:
- It is not necessary to adjust the construction openings (width or height),
- It is possible to cover the old iron or other door frame using a new wooden cover panel,
- There is no need for masonry, troweling, painting works, etc.,
- Despite the slightly higher price, it is a less invasive process (no dust and clutter, no wet processes).
Disadvantages of Custom-made Doors:
- Higher price compared to standardized doors.
Design your door online. Try our custom door configurator.
Standard Interior Doors
Standard doors are doors whose height and width are predetermined according to the STN standard 1970 (a construction opening in exact dimensions must also be made).
Advantages of Standard Doors:
- Cheaper than atypical,
- Widely available in various retail chains.
Disadvantages of Standard Doors:
- The exact width and height of the construction opening must be observed (see table below),
- In apartment buildings or older family houses, it is often necessary to modify the building openings – this entails inconveniences (dust, noise, wet and lengthy process of fitting the door).
Door Opening Systems
Classic Doors
They form the widest group of interior doors. We supply them as single-leaf doors in standardized sizes 60, 70, 80, 90 (100 and 110 to order) and double-leaf doors in sizes 125, 145, 165, and 185. This range of doors consists of rebate and rebate-free doors.
Rebated Doors
This type of door has a half-groove formed around the perimeter of the sash, which, when closed, covers the gap between the door and the door frame.
Non-rebated Doors
A hot trend in interior design. In this modern solution, the door is recessed to the level of the paneling, which creates a uniform area of the door with the door frame. In addition, the 3D hidden hinges allow the door to be opened in full 180˚ and adjusted in up to three different directions. The doors are locked using a magnetic lock.
Sliding Door in Front of the Wall
Sliding doors have sophisticated mechanics. It is built into the upper guide rail, which allows easy movement of the door leaves to the sides when opened. With the two-leaf variant, the leaves can be moved individually or synchronously.
The casement door frame is mounted so that the sliding door fits as close to the door frame as possible.
In this version, we supply single-leaf doors 60, 70, 80, 90 (100 and 110 to order) and double-leaf doors in sizes 125, 145, 165, and 185. In this series, we can also supply atypical doors according to the dimensions of construction openings. A built-in lock is a matter of course.
Wall Case Door Jap, Eclisse, Unitrex
We supply the building case door as single-leaf non-rebated sliding doors in sizes 60, 70, 80, 90 (100 and 110 to order) and double-leaf sliding doors in sizes 125, 145, 165, and 185, while the type series is subject to a standardized building case. The thickness of the door is 4 cm.
Lamella-folding Doors
Ideal for confined spaces that do not allow the classic doors to open fully. After opening this door, approximately 1/3 of the width of the sash extends into both sides of the rooms. The brightness of the transition space is reduced by approximately 10 cm. We only supply single-leaf doors in sizes 80 and 90 cm.
Cross Corridor Doors
Especially suitable for companies where the frequency of staff movement through the door does not allow the door to be opened manually, but rather by body movement. These doors are manufactured as single-leaf in sizes 60, 70, 80, 90 (100 and 110 to order). Model series A, F, H, and I are recommended for this type.
Doors with Skylights
Is your corridor dark? The door frames with the skylight will illuminate it. Such door frames are fitted with standardized revolving doors either single-leaf in sizes 60, 70, 80, 90 (100 and 110 to order) or double-leaf doors in sizes 125, 145, 165, and 185.
Wall with Doors
If you do not want the heat to escape when entering the house, the wall with the door is the right choice. These can be rotatable or sliding. The color of the wall with the skylight is identical to the interior door – a unique uniform effect.
Got Questions?
Fill in the form and we will contact you
as soon as possible.